EPROM

Introduction

An EPROM, short for Erasable Programmable Read-Only Memory, is a type of non-volatile memory that can be electrically programmed and erased. It is widely used in various electronic devices, such as microcontrollers, computers, and consumer electronics. EPROMs have played a significant role in the development of digital technology, allowing for the storage and retrieval of data even when power is turned off. This article will provide an overview of EPROMs, their history, working principle, applications, and future prospects.

History

The concept of EPROM was first introduced by Dov Frohman of Intel in 1971. The initial EPROMs were based on a floating-gate MOSFET (metal-oxide-semiconductor field-effect transistor) structure, which allowed for the storage of charge in a floating gate. This charge could be retained even when the power supply was disconnected. The first commercially available EPROM was the Intel 1702, which had a capacity of 2 kilobits.

Working Principle

EPROMs are based on a principle called "hot carrier injection." The memory cells in an EPROM consist of a floating gate and a control gate. The floating gate is insulated from the control gate by a thin oxide layer. When a high voltage is applied to the control gate, electrons are injected into the floating gate, trapping them there. This trapped charge alters the threshold voltage of the memory cell, allowing it to be read as either a "0" or a "1."

To program an EPROM, a higher voltage is applied to the control gate, causing a strong electric field that enables electrons to tunnel through the oxide layer and onto the floating gate. This process is irreversible and permanently alters the memory cell's threshold voltage. To erase an EPROM, it needs to be exposed to ultraviolet (UV) light, which removes the trapped charge from the floating gate, resetting the memory cell to its original state.

Applications

EPROMs have been widely used in various applications. In the early days of computing, EPROMs were used for firmware storage in microcontrollers and embedded systems. They were also used for storing BIOS (Basic Input/Output System) in personal computers. EPROMs have found applications in video game consoles, where they store game data and firmware. Additionally, EPROMs have been used in scientific instruments, automotive electronics, and industrial control systems.

Future Prospects

With the advancement of technology, EPROMs have been largely replaced by more advanced non-volatile memory technologies, such as EEPROM (Electrically Erasable Programmable Read-Only Memory) and flash memory. These newer memory technologies offer higher densities, faster programming times, and lower power consumption. However, EPROMs still find niche applications where their specific characteristics, such as radiation resistance and high endurance, are required.

See Also

• EEPROM - Electrically Erasable Programmable Read-Only Memory
• Flash Memory - Non-volatile memory technology
• Microcontroller - Integrated circuit used in embedded systems
• BIOS - Basic Input/Output System

EPROM

• 

  4Mbit EPROM Texas Instruments TMS27C040

• 

  EPROM

• 

  Floating gate transistor

• 

  Dr. Neuhaus, Smarty 28.8 TI - Atmel AT27C010

• 

  K573RF1

• 

  K573RF1